LTC3833EUDC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3833 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.2MHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3833EUDC#PBF Overview
Capsuled in the 20-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 200kHz~2MHz. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . A variety of dc switching's functions can be performed on 20 terminations. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3833". Total pins of switching converter are 20. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. Based on the test statistics, DC regulator outputs voltage 5.5V. Voltages 38V are the maximum that the dc to dc regulator will accept. You should note down the dc dc regulator's usual output current of 25A when you start a project. DC regulator's maximum frequency is 2.2MHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V so that the need can be met more directly.
LTC3833EUDC#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V
LTC3833EUDC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3833EUDC#PBF DC to DC converter applications.
- Computer-related products
- Series voltage regulation circuits
- Laboratories
- Product burn-in
- Terrestrial set-top boxes
- Wind power
- Direct power supply system
- Plate bending machines
- Scientific research
- Correction machines
