LTC3833IUDC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3833 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.2MHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3833IUDC#PBF Overview
This switching controller fits most application requirements since it is packaged in a 20-WFQFN Exposed Pad package. dc motor controller is suitable for 1 output generation. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~38V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 200kHz~2MHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Power Good, Soft Start, Tracking. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a QUAD terminal on the switching converters. There are many different types of terminations for 20. DC switcher's voltage input is 15V. LTC3833 can be searched for other relevant dc to dc converter ics. There are only 20 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. DC regulator outputs 5.5V voltage based on test statistics. The dc to dc regulator is limited to 38V input voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. There is a maximum frequency of 2.2MHz for this dc regulators. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V to better satisfy the requirement.
LTC3833IUDC#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V
LTC3833IUDC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3833IUDC#PBF DC to DC converter applications.
- Current source circuits
- Medical equipment
- Lathes
- Boring machines
- Milling machines
- Combined machine tools
- Domestic water pumps
- Various precision measuring instruments
- Electrical distribution systems
- Photovoltaic power
