LTC3834EGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3834 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3834EGN-1#PBF Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. A -40°C~85°C TA dc switcher is not a problem. This switching controller can switch at 250kHz~530kHz. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Soft Start, Tracking which allows efficient switching control. SWITCHING REGULATOR analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. LTC3834 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 4V should be the minimum input voltage for the dc dc voltage regulator. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. There is a maximum frequency of 580kHz for this dc regulators.
LTC3834EGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3834EGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3834EGN-1#PBF DC to DC converter applications.
- Medical equipment
- Domestic water pumps
- Scientific research
- Laboratories
- Wind power
- Solar power plants
- Electrical distribution systems
- Industrial robots
- Radio equipment
- Automatic plug-in machines
