LTC3834IDHC-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3834 |
| Function | Step-Down |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 580kHz |
| Max Duty Cycle | 99.4 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3834IDHC-1#PBF Overview
Capsuled in the 16-WFDFN Exposed Pad package, the switching controller suits most application needs. Packaged in solid enclosures, this pmic has a Tube rating. With Transistor Driver dc switching's output (s), it is able to handle it. A 4V~36V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 250kHz~530kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Soft Start, Tracking. An analog IC SWITCHING REGULATOR is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 16 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. In addition to "LTC3834", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. This dc to dc regulator accepts only 36V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 99.4 %. DC regulator's maximum frequency is 580kHz. This controller contains 1 phases.
LTC3834IDHC-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
LTC3834IDHC-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3834IDHC-1#PBF DC to DC converter applications.
- Refrigerators of central air conditioners
- Various precision measuring detectors
- Smart grid
- Television equipment
- Special machining machine tools
- Imported equipment
- Overvoltage protection circuits in TV sets
- Handheld GPS
- Computer-related products
- Serial communication converter
