LTC3834IFE#TRPBF
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3834 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
LTC3834IFE#TRPBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 4V~36V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. There is a switch at 250kHz~530kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Enable, Phase Control, Power Good, Soft Start, Tracking which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 20 terminations of dc switching. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3834". 20 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4V. A 10V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 36V input voltage at most. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. There is a maximum frequency of 580kHz for this dc regulators.
LTC3834IFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
LTC3834IFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3834IFE#TRPBF DC to DC converter applications.
- Surface processing equipment
- Combined machine tools
- Computer application technology
- Various CNC machine tools
- Geothermal power
- Automatic testing equipment
- Mobile phones
- Grinders
- Telecommunications equipment
- Various precision measuring instruments
