LTC3835EDHC-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3835EDHC-1#TRPBF Overview
In the 16-WFDFN Exposed Pad package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4V~36V and has a 4V~36V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. Switching can be done at 250kHz~530kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Soft Start, Tracking for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. 16 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. A search for "LTC3835" will reveal other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. 4V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 10V voltage. Voltages 36V are the maximum that the dc to dc regulator will accept. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. 580kHz is the maximum frequency of this dc regulators.
LTC3835EDHC-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835EDHC-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835EDHC-1#TRPBF DC to DC converter applications.
- PSRR circuits
- Printing equipment
- Television equipment
- Series voltage regulation circuits
- Grinders
- Experimental setup
- Smart grid
- Digital video recorders
- Planers
- Serial communication converter
