LTC3835EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Max Duty Cycle | 99.4 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3835EFE#PBF Overview
With a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4V~36V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~85°C TA rating. This switching controller can switch at 250kHz~530kHz. dc dc regulators can be carried out with Surface Mount. Enable, Phase Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 20. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3835". There are 20 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4V. A 10V voltage of DC regulator was detected in the test statistics. At most, the dc to dc regulator accepts 36V input voltage. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 99.4 %. DC regulator580kHz has the maximum frequency. During switching, this controller has a phase of 1.
LTC3835EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
LTC3835EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835EFE#PBF DC to DC converter applications.
- Automation technology
- Linear guide
- Industrial controllers
- Scientific research
- Hydraulic presses
- PSRR circuits
- CNC system
- Thermal power
- Production lines
- Domestic water pumps
