LTC3835EFE#TRPBF
| Parameters | |
|---|---|
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
LTC3835EFE#TRPBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 4V~36V. Worked in a -40°C~85°C TA dc switcher before. The switching controller can be switched at 250kHz~530kHz. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Phase Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. Various 20 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 12V. A search for "LTC3835" will reveal other relevant dc to dc converter ics. There are only 20 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 10V voltage. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. You should note down the dc dc regulator's usual output current of 20A when you start a project. There is a maximum frequency of 580kHz on this dc regulators.
LTC3835EFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835EFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835EFE#TRPBF DC to DC converter applications.
- Digital video recorders
- Power supplies of electronic gadgets
- Various precision measuring detectors
- Nuclear power plants
- Medical equipment
- Solar power plants
- Balance equipment
- Planers
- Servo drive system
- Production lines
