LTC3835EGN-1#TRPBF
| Parameters | |
|---|---|
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
LTC3835EGN-1#TRPBF Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. Qualified to work in an dc switcher with -40°C~85°C TA. In this switching controller, the switch can be set to 250kHz~530kHz. dc dc regulators can be carried out with Surface Mount. Enable, Soft Start, Tracking provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. LTC3835 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 10V voltage according to the test statistics. The dc to dc regulator is limited to 36V input voltage. If you start a project, note down the dc dc regulator's usual output current of 20A. DC regulator has a maximum frequency of 580kHz.
LTC3835EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835EGN-1#TRPBF DC to DC converter applications.
- Medical equipment
- Smart grid
- Automatic plug-in machines
- Emergency lighting monitoring equipment
- Electrical power transmission
- Production lines
- Nuclear power plants
- Pipe bending machines
- Solar power plants
- Wind power
