LTC3835IDHC-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3835IDHC-1#PBF Overview
Capsuled in the 16-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4V~36V volts and has 4V~36V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 250kHz~530kHz . Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "LTC3835". There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 10V volts. At most, the dc to dc regulator accepts 36V input voltage. normally, the dc dc regulator's output current is 20A, which you should keep in mind when starting a project. This dc regulatorhas a max frequency of 580kHz.
LTC3835IDHC-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835IDHC-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835IDHC-1#PBF DC to DC converter applications.
- Machining centers
- Driver circuits
- Refrigerators of central air conditioners
- ATMs
- Electrical power transmission
- Wide-range voltage regulation circuits
- Precision electronic equipment
- Medical equipment
- Emergency lighting monitoring equipment
- Hydro power
