LTC3835IDHC-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3835IDHC-1#TRPBF Overview
It comes in the 16-WFDFN Exposed Pad package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 4V~36V. Qualified to work in an dc switcher with -40°C~85°C TA. Switching can be done at 250kHz~530kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Soft Start, Tracking which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "LTC3835". In total, switching converter has 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 4V. A 10V voltage of DC regulator was detected in the test statistics. At most, the dc to dc regulator accepts 36V input voltage. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. 580kHz is the maximum frequency of this dc regulators.
LTC3835IDHC-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835IDHC-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835IDHC-1#TRPBF DC to DC converter applications.
- Energy management systems
- Solar power plants
- Mobile phones
- Emergency lighting monitoring equipment
- SMT equipment
- Medical monitoring systems
- Bending machines
- Linear guide
- Imported equipment
- Smoke prevention equipment
