LTC3835IGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 650kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 4.8895mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3835IGN-1#PBF Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). A 4V~36V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller is capable of switching at the 250kHz~530kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. A search for "LTC3835" will reveal other relevant dc to dc converter ics. In total, switching converter has 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 4V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 10V voltage. Voltages 36V are the maximum that the dc to dc regulator will accept. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. Switching controllers work at 650kHz Hz.
LTC3835IGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 650kHz
LTC3835IGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835IGN-1#PBF DC to DC converter applications.
- Elevator lighting
- Remotely powered electric motors
- Analog precision reference circuits
- Plate bending machines
- Motor controller circuits
- Nuclear power plants
- Smoke prevention equipment
- Automation technology
- Energy management systems
- Fire elevators
