LTC3835IGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3835IGN-1#TRPBF Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4V~36V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 250kHz~530kHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Soft Start, Tracking. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. A search for "LTC3835" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4V. Based on the test statistics, DC regulator outputs voltage 10V. The dc to dc regulator can only accept a maximum input voltage of 36V. You should note down the dc dc regulator's usual output current of 20A when you start a project. There is a maximum frequency of 580kHz on this dc regulators.
LTC3835IGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835IGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835IGN-1#TRPBF DC to DC converter applications.
- Industrial robots
- SMT equipment
- Computer rooms
- Mobile phones
- Electrical distribution systems
- Pipe bending machines
- Textile machinery
- Smoke exhaust equipment
- Remotely powered electric motors
- Motor controller circuits
