LTC3838EUHF#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3838 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3838EUHF#PBF Overview
Capsuled in the 38-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~38V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 200kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at QUAD . A variety of 38 terminations are available in dc switching. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3838". 38 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 5.5V voltage based on test statistics. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. This dc regulatorhas a max frequency of 2MHz. For better satisfaction, the value of DC to DC voltage regulator is OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V. Thare are switch converters of the PolyPhase? series. There are 1 channels for high-quality communication.
LTC3838EUHF#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V
LTC3838EUHF#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3838EUHF#PBF DC to DC converter applications.
- Access control systems
- Product testing
- Correction machines
- Flexible manufacturing cells
- Smoke exhaust equipment
- Electric heating, lighting
- Textile machinery
- Geothermal power
- Electrical power transmission
- Energy management systems
