LTC3839EUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3839 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3839EUH#PBF Overview
The switching controller fits in the 32-WFQFN Exposed Pad package and is ideal for most applications. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4.5V~38V volts and has 4.5V~38V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. The switch converters are connected to an analog IC with a SWITCHING REGULATOR output. There are a QUAD terminal on the switching converters. A variety of 32 terminations are available in dc switching. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3839". In total, switching converter has 32 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Statistically, DC regulator outputs 5.5V volts. Considering the dc to dc regulator can only accept 38V input voltage, it is important to take note of this. You should note down the dc dc regulator's usual output current of 25A when you start a project. DC regulator's maximum frequency is 2MHz. The dc to dc voltage regulator is from the PolyPhase? series. In order to ensure high-quality communication, there are 1 channels available.
LTC3839EUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
LTC3839EUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3839EUH#PBF DC to DC converter applications.
- Shearing machines
- Refrigerators of central air conditioners
- Wind power
- Thermal power
- Driver circuits
- Post equipment
- Injection molding machinery
- Low output voltage switching power supply circuits
- Electric heating, lighting
- Linear guide
