LTC3850EGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3850 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 23.32V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~24V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~780kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 860kHz |
| Duty Cycle (Max) | 97.2% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3850EGN#TRPBF Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4V~24V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. The switching controller can be switched at 250kHz~780kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 28 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Searching "LTC3850" will return other relevant dc to dc converter ics. The switching converter has a total of 28 pins. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 23.32V voltage. It is estimated that this dc regulatorhas a maximum frequency of 860kHz. Channels are 1 for high-quality communication.
LTC3850EGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3850EGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3850EGN#TRPBF DC to DC converter applications.
- Precision electronic equipment
- Automatic plug-in machines
- Domestic water pumps
- seismic instrument power circuits
- Electrical power transmission
- Product testing
- Wind power
- Lathes
- Automation technology
- Flexible manufacturing cells
