LTC3850IGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3850 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 23.32V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~780kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 860kHz |
| Duty Cycle (Max) | 97.2% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3850IGN-1#TRPBF Overview
With a 28-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4V~30V and has a 4V~30V supply voltage. Work well in dc switchers with a -40°C~85°C TA. This switching controller can switch at 250kHz~780kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of 28 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. LTC3850 can be searched for other relevant dc to dc converter ics. 28 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4V. DC regulator outputs 23.32V voltage based on test statistics. At most, the dc to dc regulator accepts 30V input voltage. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 860kHz. A high-quality communication requires 1 channels.
LTC3850IGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3850IGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3850IGN-1#TRPBF DC to DC converter applications.
- Photovoltaic power
- Terrestrial set-top boxes
- Alternators
- Product testing
- Gear/thread machining machines
- CMM
- Geothermal power
- Textile machinery
- Flaw detection equipment
- Emergency lighting monitoring equipment
