LTC3850IGN-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3850 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~780kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 860kHz |
| Duty Cycle (Max) | 97.2% |
| Clock Sync | No |
| Length | 9.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3850IGN-2#TRPBF Overview
As a result of 28-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). Voltages 4V~30V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~85°C TA. There is a switch at 250kHz~780kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. An array of 28 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "LTC3850". There are only 28 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 4V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. The max frequency of the pmic can reach 860kHz. There are 1 channels for high-quality communication.
LTC3850IGN-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3850IGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3850IGN-2#TRPBF DC to DC converter applications.
- Die casting equipment
- Ball screw pair
- Packaging
- Handheld GPS
- Boring machines
- Photovoltaic power
- Printing
- Constant current circuits
- Grinders
- Smart grid
