LTC3850IGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3850 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 23.32V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~780kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 860kHz |
| Duty Cycle (Max) | 97.2% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3850IGN#TRPBF Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 2 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). A 4V~30V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 250kHz~780kHz . dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. An array of 28 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "LTC3850". Total pins of switching converter are 28. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. Statistically, DC regulator outputs 23.32V volts. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. DC regulator's maximum frequency is 860kHz. For high-quality communication, there are 1 channels.
LTC3850IGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3850IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3850IGN#TRPBF DC to DC converter applications.
- Servo drive system
- Ball screw pair
- Imported equipment
- Linear guide
- Adjustable voltage or current linear circuits
- Injection molding machinery
- Driver circuits
- Overvoltage protection circuits in TV sets
- Medical monitoring systems
- Shearing machines
