LTC3851AEMSE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 235kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3851AEMSE-1#PBF Overview
In the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tube enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4V~38V volts and has 4V~38V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. This switching controller can switch at 235kHz~750kHz. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3851". There are 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. Based on the test statistics, DC regulator outputs voltage 5.5V. The dc to dc regulator is limited to 38V input voltage. The max frequency of the pmic can reach 810kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V. Current is output to the greatest value of 0.05A.
LTC3851AEMSE-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V
LTC3851AEMSE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851AEMSE-1#PBF DC to DC converter applications.
- Special machining machine tools
- Television equipment
- Remotely powered electric motors
- Alternators
- Telecommunications equipment
- Smart grid
- Medical monitoring systems
- Game consoles
- Milling machines
- Geothermal power
