LTC3851AEMSE-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 235kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3851AEMSE-1#TRPBF Overview
Capsuled in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4V~38V and has a 4V~38V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller is capable of switching at the 235kHz~750kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC3851 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. A 5.5V voltage of DC regulator was detected in the test statistics. The dc to dc regulator is limited to 38V input voltage. 810kHz is the maximum frequency of this dc regulators. The value of DC to DC voltage regulator is set at ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V in order to fulfill the requirements more effectively. A value of 0.05A is output as the maximum value of current.
LTC3851AEMSE-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V
LTC3851AEMSE-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851AEMSE-1#TRPBF DC to DC converter applications.
- Special machining machine tools
- Analog precision reference circuits
- Machining centers
- Grinders
- Communication system
- Surface processing equipment
- Motor controller circuits
- Industrial controllers
- Sensitive electronic devices
- Gear/thread machining machines
