LTC3851AEMSE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.005A |
| Frequency - Switching | 235kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3851AEMSE#TRPBF Overview
It comes in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4V~38V. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 235kHz~750kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start, Tracking which allows efficient switching control. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "LTC3851". Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator can only accept 38V input voltage. The value of DC to DC voltage regulator is set to ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V in order to better satisfy the requirement. Whenever the current value is 0.005A, switching converter outputs the highest possible value.
LTC3851AEMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V
LTC3851AEMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851AEMSE#TRPBF DC to DC converter applications.
- Drilling machines
- Electrical distribution systems
- Die casting equipment
- Sensitive electronic devices
- Milling machines
- Automatic testing equipment
- Mobile phones
- Computer monitoring equipment of building
- Flexible manufacturing cells
- Thermal power
