LTC3851AIGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.005A |
| Frequency - Switching | 235kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.8895mm |
| RoHS Status | ROHS3 Compliant |
LTC3851AIGN#PBF Overview
With a 16-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 4V~38V. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 235kHz~750kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start, Tracking which allows efficient switching control. The switch converters are connected to a SWITCHING REGULATOR analog IC. Terminal (s) of the switching converters are designed at the DUAL position. An array of 16 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3851". 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 4V. At most, the dc to dc regulator accepts 38V input voltage. There is a maximum frequency of 810kHz on this dc regulators. Hence, ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V is used to better suit the DC to DC voltage regulator's situation. Whenever the current value is 0.005A, switching converter outputs the highest possible value.
LTC3851AIGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V
LTC3851AIGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851AIGN#PBF DC to DC converter applications.
- Sensitive electronic devices
- Digital display device
- Handheld GPS
- Wide-range voltage regulation circuits
- Terrestrial set-top boxes
- Sink circuits
- Electric water heaters
- Program control systems
- Overvoltage protection circuits in TV sets
- Radio equipment
