LTC3851AIMSE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 235kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3851AIMSE-1#PBF Overview
With its 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~38V. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 235kHz~750kHz. A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. 16 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. Search for "LTC3851" to find other relevant dc to dc converter ics. The switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 5.5V voltage based on test statistics. The dc to dc regulator can only accept a maximum input voltage of 38V. This dc regulatorhas a max frequency of 810kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V so that DC to DC voltage regulator better serves the purpose. A value of 0.05A is output as the maximum value of current.
LTC3851AIMSE-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V
LTC3851AIMSE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851AIMSE-1#PBF DC to DC converter applications.
- Communication system
- Grinders
- Industrial robots
- Lathes
- Digital display device
- Computer rooms
- Flexible manufacturing cells
- PSRR circuits
- Electrical power transmission
- CMM
