LTC3851EMSE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 790kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3851EMSE-1#PBF Overview
Capsuled in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4V~38V volts and has 4V~38V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller is capable of switching at the 250kHz~750kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Power Good, Soft Start, Tracking. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 16 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Searching "LTC3851" will return other relevant dc to dc converter ics. The switching converter has a total of 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 800mV voltage. It should be fully noted that the dc to dc regulator only accepts 38V input voltage at most. You should note down the dc dc regulator's usual output current of 50mA when you start a project. There is a maximum frequency of 790kHz on this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V.
LTC3851EMSE-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V
LTC3851EMSE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851EMSE-1#PBF DC to DC converter applications.
- Pipe bending machines
- seismic instrument power circuits
- Automation technology
- Linear guide
- Boring machines
- Nuclear power plants
- Scientific testing
- Product burn-in
- Computed tomography (CT)
- Window air conditioners
