LTC3851EMSE-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5 VOLT |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3851EMSE-1#TRPBF Overview
It comes in a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4V~38V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 250kHz~750kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. LTC3851 can be used to locate other relevant dc to dc converter ics. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept 38V input voltage. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5 VOLT in order to better satisfy the requirement. Switching converter outputs current to the greatest value of 0.05A.
LTC3851EMSE-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5 VOLT
LTC3851EMSE-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851EMSE-1#TRPBF DC to DC converter applications.
- Elevator lighting
- Computer-related products
- Packaging
- Wide-range voltage regulation circuits
- Computer monitoring equipment of building
- Electric heating, lighting
- Precision electronic equipment
- Mobile phones
- Special machining machine tools
- Electrical power transmission
