LTC3851EUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3851EUD#PBF Overview
In the 16-WFQFN Exposed Pad package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 4V~38V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller can be switched at 250kHz~750kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start, Tracking which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at QUAD. An array of 16 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3851". Pins number 16 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. An input voltage of 4V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5.5V. This dc to dc regulator accepts only 38V input voltage at most. If you start a project, note down the dc dc regulator's usual output current of 50mA. A frequency of 750kHz is used by the switching controller.
LTC3851EUD#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 750kHz
LTC3851EUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851EUD#PBF DC to DC converter applications.
- Computer application technology
- PSRR circuits
- Precision electronic equipment
- CNC system
- Laboratories
- Analog precision reference circuits
- SMT equipment
- Game consoles
- Smoke exhaust equipment
- Lathes
