LTC3851EUD#TRPBF
| Parameters | |
|---|---|
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 790kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
LTC3851EUD#TRPBF Overview
It comes in the 16-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. A 4V~38V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 250kHz~750kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. LTC3851 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 16. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4V. The test statistics indicate that DC regulator outputs a voltage of 5.5V. It should be noted that the dc to dc regulator only accepts 38V voltage as input voltage. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. 790kHz is the maximum frequency of this dc regulators.
LTC3851EUD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3851EUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851EUD#TRPBF DC to DC converter applications.
- Direct power supply system
- Energy management systems
- Laboratories
- Magnetohydrodynamic power
- Plate bending machines
- Computed tomography (CT)
- ATMs
- Large fire protection systems
- Textile machinery
- Smoke prevention equipment
