Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LTC3851 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
5.5V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
25A |
Voltage - Supply (Vcc/Vdd) |
4V~38V |
Control Features |
Current Limit, Enable, Frequency Control, Soft Start, Tracking |
Input Voltage (Min) |
4V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
250kHz~750kHz |
Input Voltage (Max) |
38V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
790kHz |
Duty Cycle (Max) |
99% |
Clock Sync |
No |
Length |
4.88mm |
RoHS Status |
ROHS3 Compliant |
LTC3851IGN#TRPBF Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 4V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. A switching controller such as this can switch at a value of 250kHz~750kHz . The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Soft Start, Tracking. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "LTC3851". In total, switching converter has 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. According to the test statistics, DC regulator outputs 5.5V voltage. Considering the dc to dc regulator can only accept 38V input voltage, it is important to take note of this. You should note down the dc dc regulator's usual output current of 25A when you start a project. There is a maximum frequency of 790kHz for this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V.
LTC3851IGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V
LTC3851IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851IGN#TRPBF DC to DC converter applications.
- Die casting equipment
- Arc suppression circuits
- Direct power supply system
- Electrical distribution systems
- Gear/thread machining machines
- Emergency lighting monitoring equipment
- Precision electronic equipment
- Various precision measuring instruments
- PSRR circuits
- Series voltage regulation circuits