LTC3851IUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 99 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3851IUD#PBF Overview
In the 16-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 250kHz~750kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at QUAD. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3851". 16 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4V. Test statistics indicate DC regulator outputs 5.5V voltage. Voltages 38V are the maximum that the dc to dc regulator will accept. You should note down the dc dc regulator's usual output current of 25A when you start a project. voltage regulator dc to dcs with a 99 % duty cycle are designed to be reliable when powered on and powered off. The controller switches with phase number 1.
LTC3851IUD#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
LTC3851IUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851IUD#PBF DC to DC converter applications.
- Scientific testing
- Automation technology
- Computer-related products
- Packaging
- Network technology
- Surge protection circuits
- Milling machines
- CMM
- Solar power plants
- USB circuits
