LTC3851IUD#TRPBF
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3851 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 790kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
LTC3851IUD#TRPBF Overview
The switching controller fits in the 16-WFQFN Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 4V~38V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 250kHz~750kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start, Tracking. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. Various 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "LTC3851". There are 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 4V. DC regulator outputs 5.5V voltage based on test statistics. This dc to dc regulator accepts only 38V input voltage at most. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. There is a maximum frequency of 790kHz for this dc regulators.
LTC3851IUD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3851IUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3851IUD#TRPBF DC to DC converter applications.
- Terrestrial set-top boxes
- Linear guide
- Current source circuits
- Electrical power transmission
- Energy management systems
- Product burn-in
- Injection molding machinery
- Computer-related products
- Machining centers
- Alternators
