Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
32-WFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
PolyPhase® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
38 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Pitch |
0.5mm |
Base Part Number |
LTC3856 |
JESD-30 Code |
S-PQCC-N38 |
Function |
Step-Down |
Number of Outputs |
2 |
Output Voltage |
5V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
15V |
Number of Channels |
1 |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
25A |
Voltage - Supply (Vcc/Vdd) |
4.5V~38V |
Control Features |
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
250kHz~770kHz |
Input Voltage (Max) |
38V |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PHASE-SHIFT |
Max Frequency |
850kHz |
Duty Cycle (Max) |
94% |
Clock Sync |
No |
Height Seated (Max) |
0.8mm |
Length |
5mm |
Width |
5mm |
RoHS Status |
ROHS3 Compliant |
LTC3856EUH#TRPBF Overview
It comes in a 32-WFQFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~38V. Qualified to work in an dc switcher with -40°C~125°C TJ. This switching controller can switch at 250kHz~770kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . An array of 38 terminations of dc switching. There is a DC switcher's nominal voltage of 15V. LTC3856 can be searched for other relevant dc to dc converter ics. Pins number 32 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. Test statistics indicate DC regulator outputs 5V voltage. The dc to dc regulator can only accept a maximum input voltage of 38V. You should note that the dc dc regulator's usual output current is 25A. DC regulator850kHz has the maximum frequency. Hence, ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V is used to better suit the DC to DC voltage regulator's situation. It belongs to the dc to dc voltage regulator series PolyPhase?. In order to ensure high-quality communication, there are 1 channels available.
LTC3856EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V
LTC3856EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3856EUH#TRPBF DC to DC converter applications.
- Handheld GPS
- Mobile phones
- Drilling machines
- PSRR circuits
- Gear/thread machining machines
- Servo drive system
- Arc suppression circuits
- Television equipment
- Domestic water pumps
- Textile machinery