LTC3856IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3856 |
| JESD-30 Code | S-PQCC-N38 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3856IUH#PBF Overview
It comes in a 32-WFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 4.5V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 250kHz~770kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . 38 terminations with a variety of function. DC switcher's voltage input is 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3856". Pins number 32 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 5V volts. Voltages 38V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. There is a maximum frequency of 850kHz for this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V. The dc to dc voltage regulator is from the PolyPhase? series. A high-quality communication requires 1 channels.
LTC3856IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5V
LTC3856IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3856IUH#PBF DC to DC converter applications.
- Surge protection circuits
- Scientific testing
- Sink circuits
- seismic instrument power circuits
- Motor controller circuits
- USB circuits
- Electric water heaters
- Smart grid
- Electrical power transmission
- Remotely powered electric motors
