LTC3858EGN-1#TRPBF
| Parameters | |
|---|---|
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~835kHz 350kHz~535kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3858 |
| Function | Step-Down |
| Number of Outputs | 2 |
LTC3858EGN-1#TRPBF Overview
It comes in a 28-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. A 4V~38V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 105kHz~835kHz 350kHz~535kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Frequency Control, Power Good, Soft Start for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 28 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3858". There are only 28 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 24V voltage based on test statistics. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. This dc regulatorhas a max frequency of 850kHz. A high-quality communication requires 1 channels.
LTC3858EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3858EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3858EGN-1#TRPBF DC to DC converter applications.
- Computer-related products
- Packaging
- Ball screw pair
- Power supplies of electronic gadgets
- Special machining machine tools
- Printing
- Smoke exhaust equipment
- Current source circuits
- Smart grid
- ATMs
