LTC3859ALIFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3859 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Buck-Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 99%, 100% |
| Clock Sync | No |
| Output Phases | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3859ALIFE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package. There is sufficient capacity to generate switching controller for outputs 3. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 4.5V~38V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 115kHz~835kHz 350kHz~535kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 38 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. LTC3859 can be searched for other relevant dc to dc converter ics. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.5V.
LTC3859ALIFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 115kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3859ALIFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3859ALIFE#PBF DC to DC converter applications.
- Series voltage regulation circuits
- Product testing
- Correction machines
- Laboratories
- Analog precision reference circuits
- Grinders
- Various precision measuring instruments
- Pipe bending machines
- Injection molding machinery
- Wide-range voltage regulation circuits
