LTC3859EFE#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3859 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Buck-Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99%, 100% |
| Clock Sync | No |
| Output Phases | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
LTC3859EFE#TRPBF Overview
The switching controller fits in the 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. This dc motor controller can be used to generate outputs with 3 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.5V~38V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 115kHz~835kHz 350kHz~535kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. An array of 38 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "LTC3859" will reveal other relevant dc to dc converter ics. There are only 38 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 60V. This dc regulatorhas a max frequency of 850kHz. The number of channels available for high-quality communication is 1.
LTC3859EFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 115kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3859EFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3859EFE#TRPBF DC to DC converter applications.
- PSRR circuits
- Automatic plug-in machines
- Geothermal power
- Injection molding machinery
- Computer rooms
- Hydrogen power
- Shearing machines
- Domestic water pumps
- Servo drive system
- Radio equipment
