LTC3859EUHF#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3859 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Buck-Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99%, 100% |
| Clock Sync | No |
| Output Phases | 2 |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3859EUHF#TRPBF Overview
Capsuled in the 38-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 3, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 4.5V~38V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 115kHz~835kHz 350kHz~535kHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of terminations with 38 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "LTC3859" will reveal other relevant dc to dc converter ics. There are only 38 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. As determined by the test statistics, the output voltage of DC regulator is 60V. The max frequency of the pmic can reach 850kHz. A high-quality communication requires 1 channels.
LTC3859EUHF#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 115kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3859EUHF#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3859EUHF#TRPBF DC to DC converter applications.
- Elevator lighting
- Automatic testing equipment
- Industrial controllers
- Packaging
- Solar power plants
- Production lines
- Overvoltage protection circuits in TV sets
- Printing equipment
- Product testing
- Computer rooms
