LTC3859IFE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3859 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Buck-Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99%, 100% |
| Clock Sync | No |
| Output Phases | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3859IFE#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package. 3 outputs can be generated with the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 4.5V~38V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 115kHz~835kHz 350kHz~535kHz. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 38 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. LTC3859 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 38 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. The minimum input voltage of the dc dc voltage regulator should be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 60V. It is estimated that this dc regulatorhas a maximum frequency of 850kHz. A high-quality communication requires 1 channels.
LTC3859IFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 115kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3859IFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3859IFE#TRPBF DC to DC converter applications.
- Photovoltaic power
- Bending machines
- seismic instrument power circuits
- Precision electronic equipment
- Gear/thread machining machines
- Current source circuits
- Product burn-in
- Correction machines
- Network technology
- Boring machines
