LTC3859IUHF#PBF
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3859 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Buck-Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99%, 100% |
| Clock Sync | No |
| Output Phases | 2 |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 days ago) |
LTC3859IUHF#PBF Overview
In the 38-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 3 input. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4.5V~38V and has a 4.5V~38V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 115kHz~835kHz 350kHz~535kHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . There are many different types of terminations for 38. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. You can find other relevant dc to dc converter ics by searching "LTC3859". There are 38 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 60V. This dc regulatorhas a max frequency of 850kHz. In order to ensure high-quality communication, there are 1 channels available.
LTC3859IUHF#PBF Features
Transistor Driver Outputs
Switching Frequency: 115kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3859IUHF#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3859IUHF#PBF DC to DC converter applications.
- Die casting equipment
- Electric heating, lighting
- Automatic testing equipment
- Shearing machines
- Solar power plants
- Flaw detection equipment
- Automation technology
- Arc suppression circuits
- Hydrogen power
- Constant current circuits
