LTC3860EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3860 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 240A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.25MHz |
| Duty Cycle (Max) | 91.5% |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3860EUH#TRPBF Overview
As a result of 32-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 2 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of PWM Signal dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 3V~5.5V. Suitable for work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 250kHz~1.25MHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position QUAD . Different dc switching's functions can be applied to 32 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "LTC3860". In total, switching converter has 32 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. 3V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 5V. If you start a project, note down the dc dc regulator's usual output current of 240A. This dc regulatorhas a max frequency of 1.25MHz. Thare are switch converters of the PolyPhase? series. A high-quality communication requires 1 channels.
LTC3860EUH#TRPBF Features
PWM Signal Outputs
Switching Frequency: 250kHz~1.25MHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3860EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3860EUH#TRPBF DC to DC converter applications.
- Digital video recorders
- Planers
- Arc suppression circuits
- Electrical power transmission
- Lathes
- Bending machines
- Serial communication converter
- Surge protection circuits
- Servo drive system
- Injection molding machinery
