LTC3860IUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3860 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 240A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.25MHz |
| Duty Cycle (Max) | 91.5% |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3860IUH#TRPBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. PWM Signal dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 3V~5.5V. Worked in an dc switcher with a -40°C~125°C TJ rating. With this switching controller, you can switch at 250kHz~1.25MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. There are a QUAD terminal on the switching converters. Various 32 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "LTC3860". 32 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 3V. A 5V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 240A. It is estimated that this dc regulatorhas a maximum frequency of 1.25MHz. Basically, it's a dc to dc voltage regulator from the PolyPhase? series. In order to ensure high-quality communication, there are 1 channels available.
LTC3860IUH#TRPBF Features
PWM Signal Outputs
Switching Frequency: 250kHz~1.25MHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3860IUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3860IUH#TRPBF DC to DC converter applications.
- Emergency lighting monitoring equipment
- Cutting machine tools
- Handheld GPS
- Window air conditioners
- Energy management systems
- Drilling machines
- Various precision measuring instruments
- Linear guide
- Lathes
- Ball screw pair
