LTC3862EFE-1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
LTC3862EFE-1 Overview
As a result of 24-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC packaging is solid with a Tube enclosure. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.5V~36V. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at 75kHz~500kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8.5V. As determined by the test statistics, the output voltage of DC regulator is 3.8V. The dc to dc regulator can only accept a maximum input voltage of 36V. Hence, 10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE is used to better suit the DC to DC voltage regulator's situation.
LTC3862EFE-1 Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE
LTC3862EFE-1 Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE-1 DC to DC converter applications.
- Planers
- Remotely powered electric motors
- Communication system
- Network technology
- Window air conditioners
- Game consoles
- Computer monitoring equipment of building
- Scientific research
- Telecommunications equipment
- Digital precision reference circuits
