LTC3862EFE-1#PBF
| Parameters | |
|---|---|
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 96 % |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | LTC3862 |
LTC3862EFE-1#PBF Overview
The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. The dc motor controller is adquate to generate for 2 outputs. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 8.5V~36V volts and has 8.5V~36V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. Switching can be done at 75kHz~500kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Phase Control, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. The 24 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics will be returned if you search "LTC3862". Total pins of switching converter are 24. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 8.5V. According to the test statistics, DC regulator outputs 200V voltage. This dc to dc regulator accepts only 36V input voltage at most. You should note that the dc dc regulator's usual output current is 50mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. The switching controller works at a frequency of 500kHz. For high-quality communication, there are 1 channels.
LTC3862EFE-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 500kHz
LTC3862EFE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE-1#PBF DC to DC converter applications.
- Electrical distribution systems
- Automation technology
- Hydro power
- Linear guide
- Nuclear power plants
- Remotely powered electric motors
- Adjustable voltage or current linear circuits
- Experimental setup
- Alternators
- Digital video recorders
