LTC3862EFE-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3862EFE-2#PBF Overview
This switching controller fits most application requirements since it is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 2 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 5.5V~36V volts and has 5.5V~36V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 75kHz~500kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "LTC3862". Total pins of switching converter are 24. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 5.5V. Statistically, the DC regulator outputs 3.8V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. There is a maximum frequency of 500kHz for this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AT 10V.
LTC3862EFE-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862EFE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE-2#PBF DC to DC converter applications.
- Production lines
- seismic instrument power circuits
- Planers
- Balance equipment
- Automation technology
- Household control circuits
- Fire elevators
- Magnetohydrodynamic power
- Adjustable voltage or current linear circuits
- Solar power plants
