LTC3862EFE-2#TRPBF
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
LTC3862EFE-2#TRPBF Overview
In the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. A 5.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. It can switch at 75kHz~500kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Soft Start which allows efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . 24 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". There is a particular type of Switching Regulator or Controllers in switching converter. 5.5V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 3.8V voltage according to the test statistics. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. DC to DC voltage regulator has a value of ALSO OPERATES AT 10V to better satisfy the need.
LTC3862EFE-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862EFE-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE-2#TRPBF DC to DC converter applications.
- PSRR circuits
- Adjustable voltage or current linear circuits
- Photovoltaic power
- Drilling machines
- Remotely powered electric motors
- Injection molding machinery
- Scientific research
- Magnetohydrodynamic power
- CMM
- Machining centers
