LTC3862EFE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3862EFE#TRPBF Overview
It comes in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4V~36V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. A switching controller such as this can switch at a value of 75kHz~500kHz . The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Soft Start. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 24 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. LTC3862 can be searched for other relevant dc to dc converter ics. In total, switching converter has 24 pins. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 3.8V voltage. At most, the dc to dc regulator accepts 36V input voltage. DC regulator's maximum frequency is 500kHz. Communication on 1 channels is high-quality.
LTC3862EFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862EFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE#TRPBF DC to DC converter applications.
- Electrical power transmission
- SMT equipment
- Household control circuits
- Post equipment
- Industrial robots
- Power supplies of electronic gadgets
- Low output voltage switching power supply circuits
- Gear/thread machining machines
- Injection molding machinery
- Wide-range voltage regulation circuits
