LTC3862EGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862EGN-1#TRPBF Overview
The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.5V~36V. Worked in a -40°C~85°C TA dc switcher before. Switching can be done at 75kHz~500kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control, Phase Control, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 24 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3862". The switching converter has a total of 24 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 8.5V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 200V. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. DC regulator's maximum frequency is 500kHz. Communication with high quality requires 1 channels.
LTC3862EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EGN-1#TRPBF DC to DC converter applications.
- Boring machines
- Emergency lighting monitoring equipment
- Solar power plants
- Hydro power
- Post equipment
- Elevator lighting
- Energy management systems
- Hydraulic presses
- Wind power
- Scientific testing
