LTC3862EGN-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862EGN-2#PBF Overview
The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Packaging for the pmic consists of Tube solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 5.5V~36V and has a 5.5V~36V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 75kHz~500kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Soft Start. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 24 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Searching "LTC3862" will return other relevant dc to dc converter ics. Switching converter is a type of Switching Regulator or Controllers in particular. 5.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 3.8V voltage. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. The value of DC to DC voltage regulator is set to ALSO OPERATES AT 10V in order to better satisfy the requirement.
LTC3862EGN-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862EGN-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EGN-2#PBF DC to DC converter applications.
- Electric water heaters
- Flaw detection equipment
- Radio equipment
- Post equipment
- Various precision measuring detectors
- Serial communication converter
- Experimental setup
- Electric heating, lighting
- Handheld GPS
- Energy management systems
