LTC3862EGN-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862EGN-2#TRPBF Overview
The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 5.5V~36V volts and has 5.5V~36V supply voltage. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 75kHz~500kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start for efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . An array of 24 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. In addition to "LTC3862", there are other relevant dc to dc converter ics you can find. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 5.5V. Statistically, DC regulator outputs 3.8V volts. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. As a result, DC to DC voltage regulator has a value of ALSO OPERATES AT 10V so that the need can be met more directly.
LTC3862EGN-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862EGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EGN-2#TRPBF DC to DC converter applications.
- Grinders
- Smoke prevention equipment
- USB circuits
- Digital precision reference circuits
- Series voltage regulation circuits
- Nuclear power plants
- Injection molding machinery
- Television equipment
- Access control systems
- Photovoltaic power
