LTC3862EUH-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3862EUH-2#TRPBF Overview
Capsuled in the 24-WQFN Exposed Pad package, the switching controller suits most application needs. For outputs of 2, this dc motor controller is suitable. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. 5.5V~36V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. There is a switch at 75kHz~500kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start for efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 24 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "LTC3862". In particular, switching converter belongs to the Switching Regulator or Controllers family. 5.5V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 3.8V voltage. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. DC to DC voltage regulator has a value of ALSO OPERATES AT 10V to better satisfy the need.
LTC3862EUH-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862EUH-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EUH-2#TRPBF DC to DC converter applications.
- Lathes
- Arc suppression circuits
- Various precision measuring instruments
- Radio equipment
- Post equipment
- Printing equipment
- Telecommunications equipment
- Wind power
- Refrigerators of central air conditioners
- Grinders
